We all know the benefits of Bathroom Brass Floor Drain, deodorants, and insect repellants, but the situation where the deodorant floor drain is slow and odor surrounded for a long time has greatly affected the user's experience of using floor drains.
1. The reason why the deodorant floor leaks slowly
Explain from the structure! Common deodorant floor drains, compared with ordinary non-deodorant floor drains, have an extra plastic gasket at the bottom. Usually when there is no drainage, the water valve is closed, because it is closed, the odor and insects from the sewer pipe cannot get out, which achieves the effect of deodorization. When it is time to drain, the water valve is opened due to the gravity of the water to achieve the drainage effect.

Because of the addition of a water valve, the speed of drainage will be slowed down, just like driving on the road and building the subway in front, and the fence occupies a lane. As long as the traffic flow is large, there will be traffic jams here. The same is true for drainage, so the drainage is slow.
2. What should I do if the deodorant floor leaks slowly?
1. The straight-through airtight floor drain should be preferred.
2. For places with high hygienic standards or infrequent use of floor drains for drainage, straight-through closed floor drains should be set up.
Note: The straight-through closed floor drain is: when there is water flowing through, the gasket at the bottom of the floor drain will automatically open, and the straight-through drainage will automatically close by the internal device to form a full seal.
3. The greater the slope of the ground towards the floor drain, the smoother the drainage. Generally, the slope of the drainage pipe should be more than 1%, that is, the slope of the 1-meter water pipe should be more than 1 cm, and the slope of the 3-meter water pipe should be more than 3 cm. Because the toilet drainage pipes are relatively concentrated, and the drainage in the shower is large, the water can flow everywhere. If the slope is not enough, it is easy to store water or drain slowly in some places with relatively small slopes. Therefore, the slope of the bathroom floor must be appropriate, neither too large nor too small. If the slope is too large, people will feel uncomfortable standing on it.
4. There is another way to solve the ground slope. You can make a little slope in the bathroom cabinet or toilet. This is to allow the water to drain through the floor drains in these two places in case of water accumulation. The slope of these two places can be slightly gentler, close to the level, as long as there is a little slope, the water can flow over. However, the slope should be moderately increased in the shower.
5. Another effective way to solve the drainage slope is to increase the slope around the floor drain, make a diagonal line with the bricks for installing the floor drain, and place the floor drain in the middle of the bricks, so that the slope of the floor drain installation is very obvious. However, before installation, the owner should connect with the master and tell the master the size and specifications of the bathroom floor tiles, so that the master can install the floor drain.