Basin drainer does not press, what is the cause?

1. The sewer has not been cleaned for a long time, and there is dirt in it. 2. The plastic part connected in the middle of the drain is corroded after a long time of use. 3. The service life of the drain has been exhausted.

If there is dirt that has not been cleaned for a long time, it is recommended that consumers clean the drainer every other month, which not only ensures that the drainer is not blocked by dirt and cannot be pressed, but also ensures the service life of the drainer. It is also important to do this to avoid bacterial growth caused by long-term blockage of dirt.

Although the drain is made of copper, the middle connection part is a plastic sheet, which is easily corroded by dirt if it is used for a long time. This will also cause the phenomenon to not be pressed. In addition, the drain also has a service life, the general service life is two years. Of course, if you usually pay attention to cleaning, you may use it for a longer time, but if it does not move after the service period, you must replace it in time. At this time, the significance of maintenance is not great.

At the same time, consumers are reminded that the sewers are the most likely places to "hold dirt" to breed bacteria, and are usually ignored by everyone. Don't pay attention to problems as soon as they occur. For environmental hygiene and the health of your family members, you should regularly clean up and replace them when necessary.